change of IP

September 20, 2014, 5:01 am

≪ Previous: Configure Over quota mailboxes to bounce messages

so one of our boxes need to change from public ips to internal 10.x ones. However when I go to manage ip's I cannot delete the existing public ip as it has ssl on it.

- how do I move a domain from a public ip to an 10.x ??

↧

BFD Config that works

September 20, 2014, 7:11 pm

≫ Next: Get message when i want to ad a second database

≪ Previous: change of IP

Hello

I need a example of bfd configs that work with Interworx please I continue to have hacking issues and I am getting sick and tired of dealing with this every day on the pop3 and the smtp server.

Here is the log /var/log/maillog entry

Sep 20 22:26:39 fwh vpopmail[6506]: vchkpw-smtp: vpopmail user not found angela@:217.160.252.130

This does not look like its the correct argu

more vpopmail
# failed logins from a single address before ban
# uncomment to override conf.bfd trig value
# TRIG="10"

# uncomment to disable alerting for this rule
# SKIP_ALERT="1"

# file must exist for rule to be active
REQ="/var/qmail/bin/qmail-pop3d"

if [ -f "$REQ" ]; then
PORTS="110,143,993,995"
LP="/var/log/maillog"
TLOG_TF="vpopmail"

## vpopmail [qmail]
ARG_VAL=`$TLOG_PATH $LP $TLOG_TF | sed -e 's/::ffff://' | grep -E '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+' | sed -n -e '/vchkpw-pop3: password fail/s
/.*password fail $[^ ]*$$.*$:$[^ ]*$.*/\3:\1/p' -e '/vchkpw-pop3: system user not found/s/.*system user not found $[^ ]*$$.*$:$[^ ]
*$.*/\3:\1/p' -e '/vchkpw-pop3: vpopmail user not found/s/.*vpopmail user not found $[^ ]*$$.*$:$[^ ]*$.*/\3:\1/p'`
fi

↧

Get message when i want to ad a second database

September 21, 2014, 4:29 am

≫ Next: subdomain with the same Document Root

≪ Previous: BFD Config that works

Hi,
Got a little problem on my siteworx account.
I have create true nodeworx a siteworx account, with a capacities of 20 databases now the problem am facing is when i want to ad a second database with the same user under the same account i get a message:

There was a problem validating the form. Please see details below.

but i don`t see the problem..
the only thing i want is to ad a second database..
how to resolve this?

Regards Marcel

↧

subdomain with the same Document Root

September 22, 2014, 11:38 am

≫ Next: https sites without SSL certs

≪ Previous: Get message when i want to ad a second database

Hi!
can I modify my Document Root of my subdomain m.mydomain.com to the same document root to www.mydomain.com?

I've read http://forums.interworx.com/threads/...5090#post25090

this one isn't create another domain, if share the document root with subdomain , what can I do?

↧

https sites without SSL certs

September 23, 2014, 7:16 am

≫ Next: HELP! Interworx chewing up resources!

≪ Previous: subdomain with the same Document Root

Hi,

I am new to interworx and currently testing a demo version of the software. We are looking at a replacement for Plesk and one of the features (for better or for worse) is that you don't need an SSL certificate to activate the https://www.domain.com - it will just work with a security warning. To clarify, sites that should have an SSL will have an SSL, this is just for some personal sites that don't require a certificate but it is nice to have the site still work if a user accidentally goes to the https version of the site.

Having tried C-Panel I know this is something that they can't cater for and I wondered if this was possible to set up with SiteWorx?

Any help or pointers would be grateful.

Thanks

Ben

↧

HELP! Interworx chewing up resources!

September 24, 2014, 8:34 am

≫ Next: Severe shell vulnerability detected in Unix

≪ Previous: https sites without SSL certs

Our server keeps crashing today. What can I do to stop this???

The load is above 20+ now;

11:27:58 up 15 min, 1 user, load average: 22.10, 10.80, 4.65
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
root pts/0 tech.trouble-fre 11:27 0.00s 0.05s 0.04s w
[root@centos6 ~]# top
top - 11:28:04 up 15 min, 1 user, load average: 23.70, 11.51, 4.94
Tasks: 263 total, 2 running, 261 sleeping, 0 stopped, 0 zombie
Cpu(s): 40.8%us, 10.8%sy, 0.0%ni, 0.0%id, 35.8%wa, 0.0%hi, 0.3%si, 12.4%st
Mem: 2956816k total, 1658112k used, 1298704k free, 33872k buffers
Swap: 2047996k total, 0k used, 2047996k free, 322236k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2573 mysql 20 0 1338m 85m 7340 S 18.7 3.0 0:28.45 mysqld
5597 universa 20 0 263m 18m 7728 S 18.4 0.7 0:00.61 php-cgi
7 root RT 0 0 0 0 S 13.6 0.0 0:01.41 migration/1
2691 root 20 0 114m 1276 660 S 13.6 0.0 0:00.45 crond
773 qmails 20 0 4120 616 488 R 9.1 0.0 0:00.30 qmail-send
5598 universa 20 0 261m 17m 7696 D 9.1 0.6 0:00.30 php-cgi
5505 universa 20 0 370m 31m 7964 S 4.2 1.1 0:01.65 php-cgi
5471 universa 20 0 370m 31m 7964 S 3.6 1.1 0:00.30 php-cgi
6 root RT 0 0 0 0 S 3.0 0.0 0:02.15 watchdog/0
5606 root 20 0 227m 18m 7412 S 2.1 0.6 0:00.07 php
5621 root 20 0 224m 17m 7468 S 1.8 0.6 0:00.06 php

There are the high processes, cpu wise.

I see:
universa 5180 0.2 1.1 381404 35032 ? S 11:24 0:00 /usr/bin/php-cgi
universa 5182 0.4 1.1 381404 35032 ? S 11:24 0:01 /usr/bin/php-cgi
universa 5192 0.0 0.8 373040 24248 ? S 11:24 0:00 /usr/bin/php-cgi
universa 5306 0.2 1.1 381404 35032 ? S 11:25 0:00 /usr/bin/php-cgi
universa 5307 0.6 1.1 381404 35036 ? S 11:25 0:01 /usr/bin/php-cgi
universa 5315 0.0 0.7 271900 22156 ? S 11:25 0:00 /usr/bin/php-cgi
universa 5431 0.0 0.6 269392 19328 ? S 11:26 0:00 /usr/bin/php-cgi
universa 5443 0.0 0.5 267472 17092 ? D 11:26 0:00 /usr/bin/php-cgi
universa 5453 0.0 0.5 267472 17096 ? D 11:26 0:00 /usr/bin/php-cgi
universa 5456 0.0 0.5 267748 17516 ? D 11:26 0:00 /usr/bin/php-cgi
universa 5468 0.0 0.6 269296 19348 ? S 11:26 0:00 /usr/bin/php-cgi
universa 5474 0.1 0.8 373108 26264 ? S 11:27 0:00 /usr/bin/php-cgi
universa 5481 0.1 0.6 269556 19404 ? S 11:27 0:00 /usr/bin/php-cgi
universa 5490 3.7 0.5 267472 17096 ? D 11:27 0:03 /usr/bin/php-cgi
universa 5498 0.8 0.5 267472 17096 ? D 11:27 0:00 /usr/bin/php-cgi
universa 5500 1.4 0.5 267472 17092 ? D 11:27 0:01 /usr/bin/php-cgi
universa 5517 4.1 0.6 269132 19196 ? D 11:27 0:03 /usr/bin/php-cgi
universa 5521 4.2 0.5 267732 17448 ? D 11:27 0:03 /usr/bin/php-cgi
universa 5525 0.7 0.5 267472 17096 ? D 11:27 0:00 /usr/bin/php-cgi
universa 5526 0.1 0.5 267748 17512 ? D 11:27 0:00 /usr/bin/php-cgi
universa 5533 2.0 0.8 371448 24796 ? S 11:27 0:01 /usr/bin/php-cgi
universa 5534 3.0 0.5 267748 17512 ? D 11:27 0:02 /usr/bin/php-cgi
universa 5549 0.1 0.5 267472 17100 ? D 11:27 0:00 /usr/bin/php-cgi
universa 5553 0.2 0.8 371760 25144 ? S 11:27 0:00 /usr/bin/php-cgi
universa 5591 0.2 0.5 267388 17160 ? D 11:27 0:00 /usr/bin/php-cgi
universa 5597 1.3 0.6 269332 19320 ? S 11:28 0:00 /usr/bin/php-cgi
universa 5598 0.6 0.5 267748 17512 ? D 11:28 0:00 /usr/bin/php-cgi
universa 5634 0.1 0.5 267748 17512 ? D 11:28 0:00 /usr/bin/php-cgi
universa 5653 0.7 1.1 380292 33820 ? S 11:28 0:00 /usr/bin/php-cgi
universa 5654 0.5 0.9 376096 29504 ? S 11:28 0:00 /usr/bin/php-cgi
universa 5655 0.3 0.8 371728 25256 ? S 11:28 0:00 /usr/bin/php-cgi
universa 5656 0.2 0.5 267748 17504 ? D 11:28 0:00 /usr/bin/php-cgi
universa 5657 0.2 0.5 267648 17168 ? D 11:28 0:00 /usr/bin/php-cgi
universa 5659 0.2 0.5 268044 17524 ? D 11:28 0:00 /usr/bin/php-cgi
universa 5661 0.8 0.8 371756 25344 ? S 11:28 0:00 /usr/bin/php-cgi
universa 5663 0.4 0.5 267748 17516 ? D 11:28 0:00 /usr/bin/php-cgi
universa 5664 1.0 0.8 371260 24688 ? S 11:28 0:00 /usr/bin/php-cgi
universa 5736 0.6 0.5 267492 17184 ? S 11:28 0:00 /usr/bin/php-cgi
universa 5742 0.7 0.5 267748 17440 ? S 11:28 0:00 /usr/bin/php-cgi
universa 5755 0.8 0.5 268244 17412 ? S 11:28 0:00 /usr/bin/php-cgi
universa 5887 3.3 0.5 267748 17456 ? S 11:28 0:00 /usr/bin/php-cgi

All from httpd:
|-httpd-+-43*[httpd---php-cgi]
| |-2*[httpd---php-cgi---qmail-inject---qmail-queue]
| `-10*[httpd]

Is fastcgi or mod_ruid2 supported?

↧

Severe shell vulnerability detected in Unix

September 25, 2014, 2:56 am

≫ Next: Moving large account to IW server

≪ Previous: HELP! Interworx chewing up resources!

I just got a security flash from CERT-SE that informed me that there have been a severe security issue detected in unix shell.
The vulnerability lets a potential attacker execute malicious code in the shell, and gain access to the system.

At present there are no known workarounds for this issue, except running a WAF. To test if your system is afflicted by this issue, you can run the following command in the commandline:

Code:

$ env x='() { :;}; echo vulnerable' bash -c "echo this is a test"

If your system is afflicted, you will see the following output in your shell:

Code:

vulnerable

this is a test

At present this vulnerability is known to be exploited by atleast one worm.

For more information, see the following articles:
https://securityblog.redhat.com/2014...ection-attack/
http://seclists.org/oss-sec/2014/q3/649
http://seclists.org/oss-sec/2014/q3/650

↧

Moving large account to IW server

September 25, 2014, 7:17 am

≫ Next: WHMCS connect to existing Siteworx account

≪ Previous: Severe shell vulnerability detected in Unix

Looking for a recommendation to move a 10gb site from a cpanel server to IW server without down time on old site. I tried the following:

I backed up the site in cpanel and downloaded it. Then tried to upload with import feature in Nodeworx - file size to big I upped the file size limit in php but seems only to change upload size at siteworx account level. Could be wrong but keep getting files size to large error.

I tried to get the two sights connected with mass import but having connection issues maybe due to pub keys.

Trying to Ftp up is having own issues. Set up new siteworx account but because dns is still pointing to the old server not sure how to ftp into the siteworx ftp with dns? I know how to get to the site itself http://IP Address/~unix name, but how do I ftp in without dns setup?

Any ideas?

Thx

↧

WHMCS connect to existing Siteworx account

September 26, 2014, 3:34 am

≫ Next: Access nodeworx true server.mydomain.com instead of ip

≪ Previous: Moving large account to IW server

Hi all, this is for the WHCMS users out there: Does anyone know if it is possible to connect an existing Siteworx account to a WHCMS order? Usualy I create an order in WHMCS and have it provisioning the account and it's parameters to NodeWorx. From then on the account and the order in WHMC are linked and I can see stats like disk usage etc.

But today I had to set up an account in NodeWorx first (did it from the customers office and didn't want to do the WHCMS stuff with him) and now I would like to connect that SiteWorx account with WHMCS. The module command "Create" wouldn't work, as it detects the exsiting account. Any other way this can be done?

Naturally I could delete the account in Nodeworx and have it recreated, but the whole site is live already (we kinda had to make an emergency move with their site to our server, as their old provider is gone).

Thanks

Michael

I bet John will be the first to answer :o)

↧

Access nodeworx true server.mydomain.com instead of ip

September 26, 2014, 5:49 am

≫ Next: Ruby on Rails can't activate

≪ Previous: WHMCS connect to existing Siteworx account

Hi,
Got a question how do i setup/access interworx to use server.mydomain.com instead of an ip..

Regards Marcel

↧

Ruby on Rails can't activate

September 26, 2014, 3:12 pm

≫ Next: Disable all mail services

≪ Previous: Access nodeworx true server.mydomain.com instead of ip

Hi,

i just installed ruby on rails and i can't enable it in interworx always switch back do disabled.

Centos 6.5 x64

i did:

yum groupinstall -y development
curl -L get.rvm.io | bash -s stable
source /etc/profile.d/rvm.sh
rvm reload
rvm install 2.1.3
gem update --system
gem install rails
gem install rake
yum install sqlite-devel
gem install sqlite3-ruby
gem install mysql
gem install passenger
passenger-install-apache2-module

then created /etc/httpd/conf.d/passenger.conf
and paste the output from passenger install module.

restart apache

in apache log looks that ruby is active

and in interworx i can't activate ruby on rails.

Can some1 help me?

Regards,
ajsss

↧

Disable all mail services

September 26, 2014, 8:11 pm

≫ Next: Squirrelmail folders not listed, can't create folders, 1 user only, other clients ok

≪ Previous: Ruby on Rails can't activate

Hello!

We're using external DNS and not offering email services. Is there a way of hiding the Mail tree from Siteworks users?
Basically, I'd like the anything mail related to not show up in Siteworx. Is this possible?

↧

Squirrelmail folders not listed, can't create folders, 1 user only, other clients ok

September 28, 2014, 11:44 am

≫ Next: email being delivered locally, and shouldn't

≪ Previous: Disable all mail services

Instead of a folder list, a user is experiencing the following error in Squirrelmail:

ERROR: Could not complete request.
Query: CREATE "INBOX.Learn Spam"
Reason Given: Cannot create this folder.

The [Siteworx] user's postmaster account plus a test account behave normally. Roundcube and IMP likewise work fine for the same user. All other domains are normal. Just this one mail account has the problem.

In shell I verified the user's ownership and permissions are ok. And as stated, maildir folders and files are intact.

Years ago when I encountered a similar error in Squirrelmail it turned out to be a typo for the IMAP namespace in the config file but that's not the problem this time.

Only other oddity is that the user's spam folder had collected over 16,000 messages so I deleted them. Courier has no problem with thousands of messages, but perhaps it caused Squirrelmail to choke?

Suggestions on where else to look would be appreciated.

↧

email being delivered locally, and shouldn't

September 29, 2014, 1:08 pm

≫ Next: Migrate from one SW to another?

≪ Previous: Squirrelmail folders not listed, can't create folders, 1 user only, other clients ok

I have an IW server running my websites. One of my websites is a forum. This forum sends email notifications when topics are updated etc. The forum email routes it's email through IW (don't know why.. but it does - that's ok) This works well for emails that are sent to address' outside of our domain. However, if the forum sends an email to someone from ourdomain.com it tries to deliver it locally to the webserver rather than using mx records to point to OUR mail server.

This is what I've tried (and it's still not working)

Turn off local delivery for the secondary domain where the forum is running and the top domain
Use SMTP routes to point forum.myserver.com:mail.myserver.com
Use SMTP routes to point to forum.myserver.com: (left blank)

As I'm writing this, could this be something with IW's DNS server causing amuck?

↧

Migrate from one SW to another?

September 30, 2014, 6:46 am

≫ Next: Web interworx and siteworx not available

≪ Previous: email being delivered locally, and shouldn't

We have multiple domains running on our IW server. We decided to not renew a domain name and I now need to migrate that domain to another SW account on the same server. Unfortunately I wasn't told until after the domain was kicked that we're not renewing, so I can't just go into wordpress and export the site. (every time I try WP points to fqdn.

What's the easiest way to move from one SW account to another on the same NW server? I'm looking to move newsite.ourdomain.biz to newsite.ourdomain.com

↧

Web interworx and siteworx not available

October 1, 2014, 11:38 am

≫ Next: database error: Error Code 112

≪ Previous: Migrate from one SW to another?

Was trying to do a mass import and nodeworx web interface hung, now I can't login to siteworx or nodeworx webinterface: https://server url:2443/nodeworx

Websites all work but not the control panels. I can login to the CLI commandline for nodeworx, it seems to work fine. Is there a way to reset, or kill and restart the interworx cp?

Thx

↧

database error: Error Code 112

October 2, 2014, 12:06 am

≫ Next: .htaccess permissions

≪ Previous: Web interworx and siteworx not available

Hello,

I have encountered an error when installing wordpress .The following are the error messages:

====

WordPress database error: [Error writing file './database_name/wp_users.frm' (Errcode: 122)]
WordPress database error: [Error writing file './database_name/wp_usermeta.frm' (Errcode: 122)]
WordPress database error: [Error writing file './database_name/wp_terms.frm' (Errcode: 122)]

====

I have check the MySQL data directory and look for the permissions of the databases created through siteworks.I found that the database is having SUID set for group and the secondary group is the account name instead of MySQL .

====

[root@server ~]# ls -ld /var/lib/mysql/user_test
rwx--S--- 2 mysql user 4096 Oct 2 06:42 /var/lib/mysql/user_test

===
PS : I am able to install wordpress successfully to the database which I have created manually.The issue arises only when databases are created through siteworx.

Please help.

↧

.htaccess permissions

October 2, 2014, 11:06 am

≫ Next: InterWorx Error Report

≪ Previous: database error: Error Code 112

Hi guys,

When I try to create a .htaccess file via SiteWorx, it creates it with the following permissions:

-rw------- 1 foobarxx foobarxx 1028 Oct 2 17:52 .htaccess

(chmod 600 owner read/write only)

This causes Apache to be unable to read the file, and the site to display "You don't have permission to access / on this server." when viewed via a browser.

I can log in via SSH and issue a chmod 644 to fix up the issue, but I'm not sure why the initial permissions are being set as they are by SiteWorx.

Any ideas?

↧

InterWorx Error Report

October 2, 2014, 8:27 pm

≫ Next: redirect to ip with port #

≪ Previous: .htaccess permissions

Hi,

I have recentely downgrade sql server from percona 5.6 to mysql 5.5 , After downgrade the following errors appears in my interworx control panel.

======

InterWorx Error Report
DETAIL:
FILE: /usr/local/interworx/include/drivers/other/SIM.php
LINE: 111
MESSAGE:

Undefined variable: services

STACK TRACE:
----- DEBUG STACKTRACE BEGIN -----
/usr/local/interworx/include/drivers/other/SIM.php errorHandler (111)
/usr/local/interworx/include/drivers/other/SIM.php getServiceStatus (138)
/usr/local/interworx/include/Form/NW/Mysql/AutoRestart.php getInfo (48)
/usr/local/interworx/include/Form.php _initialize (1328)
/usr/local/interworx/include/Ctrl/Nodeworx/Mysql.php getInstance (80)
/usr/local/interworx/include/IWorx/Method.php indexAction (142)
/usr/local/interworx/include/FrontController.php invoke (422)
/usr/local/interworx/include/FrontController.php _invokeMethodAndPlugins (399)
/usr/local/interworx/include/FrontController.php _invokeAction (156)
/usr/local/interworx/include/FrontController.php _route (105)
/usr/local/interworx/html/index.php route (37)
----- DEBUG STACKTRACE END -----

Please see the attachment Name: pic.jpg
Views: 9
Size: 48.0 KB

Any one please help me to sort out this issue

Is percona 5.5 and 5.6 compatable with interworx ?

Attached Images

↧

redirect to ip with port #

October 3, 2014, 2:50 pm

≫ Next: Moving SSL site from shared IP to dedicated IP

≪ Previous: InterWorx Error Report

Anyone know how to setup a simple redirect? The pointer feature doesnt allow ip/port (this should be added as a feature)

Tried setting up sub domain test.ur.com, then created an A record with test.url.com to redirect to ip, then created srv record to add port to ip, didnt work:(

↧

Latest Images